filtration systems

Detex is a flat bed coolant filter, using nonwoven fabric for eliminating magnetic and nonmagnetic particles from neat oil and emulsion. Filtration degree can be determined by the choice of the fabric, ranging from 10 to 50 micron, granting the highest level of filtration. Detex is available in 12 sizes, with a flowrate capacity from 50 to 400 l/min of emulsion and from 25 to 200 l/min of neat oil. 

No tank, no electrical board, no pump.

Fabric filtration guarantees a high filtration efficiency with a limited initial investment.

The suction is developed by two single-phase by-pass motors with carbon-brushes. These motors are protected inside a steel motor head, containing a sound absorbing material that minimizes noise during the service. The control panel located on the motor head has two independent switches, an indicator of clogged filter with light, that warns when the maximum level get reached and the switch of the electric and independent pump. You may find two handles located on the motor head, which allow to lift it easily to proceed to an inspection or for an easy emptying of the basket containing the metal chips collected,

There are two filters inside the filtering steel chamber: a fiber filter and a filter PPL, 300 microns, perfect to resist to the most abrasive oils. The suction system with inlet,  50, positioned below the filter allows to vacuum simultaneously solids and liquids (oils, lubricants, emulsions, metal chips, metal grain...)

The vacuumed material is separated instantly : the metal chips are collected in a galvanized sieve grid easily extractable, which allows a rapid disposal of its content. The finer shavings are retained by a second grid with filter PPL 300 micron, which purifies the oil/emulsion from any impurity. The oil passes through the grid and naturally falls, perfectly filtered, in the container.
This vacuum is equipped as standard with a manual drain valve and an electric pump which has a flow rate of 100 lts per minute. The collection unit incorporates an electronic floating device which stops the suction when the maximum level of the container has been reached.
This vacuum cleaner is made of a sturdy steel, equipped with non-marking wheels and brakes.

Advantages

Innovation
* The most compact vacuum cleaner for the cleaning of tanks in the mechanic industry
* Removable steel grid for the retention of metal shavings

Economic saving
* Collection and reuse of lubricants 
* Perfect to vacuum medium quantities of material

Time saving
* Reduction of downtime
* Reduction of cost maintenance

WHY CHOOSE THE "BEST-1"?

The function of general oil-water separators sold on the market only separates oil from water, but coolant contains a large number of bacteria, which will lead to deterioration and stench of coolant. Our" BEST-1" has functions to filter impurities, separate oil from water, sterilize and deodorize by an additionally fitted ozone apparatus. It also can effectively extend the service life of customers’ coolant, to enhance the machining precision, extend tool life, significantly reduce times for staff to clean and replace the cistern.

FUNCTIONAL FEATURES

The impurity substance is filtered

The oil water separation.

Ozone disinfection.

Cutting fluid quality purification

No supplies, Reduces costs.

Raise processing accuracy.

Safeguards your health and improves the environment.

The suction is provided by three by-pass motors, using carbon brushes, operated by independent switches and placed inside a sturdy steel casing . The motor head is filled with noise reducing material, in order to limit as much as possible the level of noise, and designed in order to convey the exhaust air towards the ground, so as not to bother the user and not to raise possible dust in the neighbouring area.

The filter is placed and protected inside the steel filter chamber; the filter is made of polyester, tailored with stars in order to increase the filter surface (1,4 m2), and has a high filtration efficiency (3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The frontal aluminium die-cast suction inlet (Ø80 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid and liquid material, with no need to change or take out the filter

The vacuumed material is placed inside a large container mounted on wheels (300 lt. of capacity), which makes it possible to dispose easily and safely of the sucked material thanks to the front discharge.
The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes, and with forklift intakes. All the metal parts of the vacuum are epoxy painted. Industrial construction 4mm of thickness. With the aid of a forklift is simplified the operation of empting the vacuumed materials like Metal chips. It is possible to introduce metal grid for the separation of metal chips which remain in the upper part and the liquids (like oils) that will stay in the lower part of the container. A 1” discharge valve is available to empty the liquids container.

Perfect for transport and rapid unloading with forklift

Oil and metal chips separator, galvanized steel made.

Darwin series is a range of centrifugal filters for cleaning air containing oil mists, micro-mists and smokes produced when using coolants (emulsion or neat oil). It can be used with a majority of machine tools for all machining processes. It is available in 4 sizes with three different, interchangeable filtration technologies.
Throughputs available are from 600 to 3.000 m3/h, with different combination for increasing filtration efficiency, up to 99,97%.

Mobile, compact and powerful, the vacuum cleaner OILVAC 200 is the ideal machine to suck up liquid (oil or coolant) mixed with metal chips, separate the oil from the chips and recover the clean oil thanks to a powerful air flow reversal system.
The suction is provided by three by-pass 2 stage motors, placed inside a sturdy steel casing and providing high depression and operated by independent switches. It is ideal for heavy duty performance, very resistant. The suction unit is protected by a polyester filter M class Teflon 1 micron efficiency with anti adhesive treatment (oleophobe and hydrophobe) and a floating device, which automatically stops the suction when the liquid fills up the container.
The suction inlet it can Rotate 360° to easily direct the suction hose with an internally welded inlet that deflects the incoming material.
A galvanized steel sieve grid (30 litres capacity) withholds the solid material (chips and metal parts ), a second chips basket with PPL 300micron filter withholds very fine metal dust, while the clean oil goes into the lower container (capacity 200 litres). It is then possible to pump it out rapidly, simply Switch on a powerful Lowara Electric pump that pumps out rapidly the liquid through a discharge oil proof hose fitted with a gun and valve (300lt/min power).
The vacuum cleaner chassis is totally welded and it is constructed with metal 4 mm of thickness, that guarantee an Indestructible performance during the years.
It is equipped with a tool basket also providing a support for tools and hoses when not used, and equipped with braking polyurethane castors, and forklift intakes to easily transport the machine.

Applications

Suction from machine tools of liquids, (mainly oils and coolants mixed with metal chips or other solid material)
Filtration and recovery of cutting oil and coolant liquid
Rapid collection or disposal of the filtered liquid
Reduced stand-by time of machine tools
Saving by recovering and using several times the same oil and coolant

Innovative high-quality oilseparator constructed in stainless steel. The oilseparator is designe with a four-chamber labyrint system which ensures efficient separation of the oils.

This gives the process fluid optimal conditions for separation the oils which are removed from the tank units using a highly-efficient suction head. This ensures that the process fluids are always free of unwanted oils which can affect operation and process fluid life-cycle.

Applications:

Tank units from washing systems
Machining centers
Process fluid tanks
Waste water treatment

The suction unit is a turbine motor of the “side channel blower” type: the fan being directly shafted on the motor shaft, this type of motor requires no transmission system and provides a performance of 2.850 RPM. It is thus completely maintenance free, ideal for non-stop and heavy duty performance (providing extra vacuum, up to 3200 mm. H2O depression), very silent and resistant, matching an IP 55 level. The suction unit is protected by A polyester filter and a floating device, automatically stopping the suction when the liquid fills up the container.
A metal sieve grid (30 litres capacity) withholds the solid material (chips and metal parts), ), a second chips basket with PPL 300micron filter withholds very fine metal dust, while the clean oil goes into the lower container (capacity 200 litres).
It is then possible to pump it out rapidly, through a powerful electric pump (300 litres per minute, fitted with a 2 mt. discharge oil proof hose fitted with a gun and valve).
The collection tank is made of polyester coated steel 4mm of thickness, and has a slanted shape in order to secure complete disposal of the liquid inside; accessory baskets provide a support for tools and hoses when not used, and a bolted panel enables easy cleaning of the collection tank. The vacuum cleaner is mounted on a solid steel trolley with forklifts intakes, equipped with braking and turning wheels.

Applications

Suction from machine tools of oils and coolants mixed with metal chips or other solid material
Filtration and recovery of cutting oil and coolant liquid
Rapid collection or disposal of the filtered liquid
Reduced stand-by time of machine tools
Saving by recovering and using several times the same oil and coolant Possibility to suck up and pump out simultaneously
Need for just one operator to use the machine